Baja Designs S1 Turn Signal wiring converter

This converter allows the S1's 2 wires (power and ground wire) to work with with Harleys 3 wires turn signal circuit. The S1's will run as running lights always ON and blink when you hit your blinker.
 
Included:
Two turn signal wiring converters (sold as a pair).
Hand length will come with additional adpter plugs and pins 
ST length will come with one additional adapter wire for each side shown in the last picture. This adapter wire will plug into the S1 on one end and the other end will plug into the converter (very simple install).
 
Wiring Length:
Standard Length = The S1's will be mounted to your mirrior stem
ST & FXRT style fairing = You do not have to run any wire or cut the big plug Baja Designs puts on the S1, because your fairing will hide all the wires. You will use the additional big plug adapter wire.
 
Not included:
Baja Designs S1 (unless you choose to add them to your order).
 
Bike fitment:
2018-2024 FXLRST, FXLRS, FXLR, FXBB(S)
06-17 DYNA, 
*****For Dynas refer to picture marked A. Your connector plug might be different. If your bike uses this Harley turn signal plug that plugs into your bikes harness then this will work. If you are unsure check your plug on your bike or ask your local HD dealership to look up the plug for your turn signal.
2025-26 In some cases, not always, the bike might throw codes. In some cases, not always, you might be able to clear the code.  
Your bike must have 3 wires (ground, constant power and blink). 
 
Installation:
There are several ways you can run your wiring based on your preference and bike model.
 
If you have any questions email us at sales@BanksPerformance.net or DM us on IG @BanksPerformance